Precautions for using a spliced screen

2018-07-16

When a failure occurs, it cannot be assembled by oneself.

In the event of a malfunction with an LCD display screen, it is strictly forbidden to assemble the screen yourself. Please contact the supplier for prompt handling. Improper handling by non-professionals may cause new component failures, and in severe cases, it could lead to screen breakage and leakage of liquid, rendering the display unusable. Avoid collisions or friction between the LCD display screen and any hard objects. The LCD display screen is quite fragile, with a low resistance to "impact." Many crystals and sensitive electrical components are easily damaged when subjected to impact, so it is important to be extra careful not to let objects that could easily cause damage to the screen come into contact with it.

Maintain a dry operating environment

Moisture is a big taboo for LCD splicing screens. The internal design of an LCD splicing screen is very precise, and any oxidation or corrosion caused by environmental humidity can lead to short-circuit phenomena, which can bring huge economic losses to users. Therefore, it is important to ensure that no liquid or moisture enters the LCD splicing screen, and to avoid using it in environments with high humidity for extended periods of time.

Regularly clean the LCD splicing screen

In the event of a malfunction with the spliced screen, it is strictly forbidden to assemble the LCD spliced screen yourself. Please contact the supplier for prompt handling. Improper handling by non-professionals may cause new component failures, and in severe cases, it may lead to screen breakage and liquid leakage, rendering the spliced screen unusable. Avoid collisions or friction between the LCD spliced screen and any hard objects. The LCD spliced screen product is quite fragile, and its resistance to "impact" is also relatively small. Many crystals and sensitive electrical components are easily damaged when subjected to impact. Therefore, it is necessary to be extra careful not to let objects that could easily cause damage to the spliced screen come into contact with it.

Attention to protection matters during the renovation of the surrounding environment

If a LCD splicing screen malfunctions, it is strictly forbidden to assemble the screen yourself. Please contact the supplier for timely handling. Improper handling by non-professionals may cause new component failures, and in severe cases, it may lead to screen breakage and leakage of liquid, rendering the screen unusable. Avoid collisions or friction between the LCD splicing screen and any hard objects. The LCD splicing screen is quite fragile, and its ability to withstand "impact" is limited. Many crystals and sensitive electrical components are easily damaged when subjected to impact. Therefore, you should be extra careful not to let objects that could easily damage the screen come into contact with it.
The surface of the LCD splicing screen is very fragile, so be careful not to bump or knock it, as this can easily cause the screen body to break. If the usage environment requires later renovation, make sure to leave at least half a centimeter of space around the screen body, and do not renovate right up against the edges.
It is forbidden to wipe the screen with a wet cloth, and absolutely no water should splash onto the screen body. Do not expose it to air with high dust content, and prohibit temporary storage of tools or other items above the splicing screen to prevent damage or falling and scratching the screen, which requires special care.
During the renovation process, make sure to wrap the screen body to prevent renovation dust from falling onto it and being inhaled into the internal structure, affecting its normal use.
The four sides of the LCD splicing screen are very narrow, and there are circuits around all four edges. When installing, there needs to be a gap that is wide enough for a business card to pass through between screens to facilitate heat dissipation and prevent compression.
Regarding electricity: Please ensure that the power cables can withstand the corresponding power and must have a ground wire; if screen body electricity is required, for 9 screens or more (including), please disconnect them separately.
During later renovation, pay special attention to ensuring that renovation tools, nail guns, scaffolding, wooden boards, etc., do not come into contact with the splicing screen.
Do not directly apply glue to the screen body, nor should you paste other objects onto it. During renovation, the sides should be installed with movable and detachable boards, and no heavy objects should be placed on the upper part of the screen body. If LED strip screens or marble renovation is required, they must be hung in a suspended manner, otherwise, they will press down and damage the screen body.

GUANGZHOU MENPAD TECHNOLOGY CO.,LTD

Sales Address：Room 321-322, Building 3, No. 6, Hanji Avenue, Dalong Street, Panyu District, Guangzhou

Factory Address:Building L13,Tian'an Zhigu Science and Technology Industrial park,No 18 Chuangxin Road,Qingyuan high tech Industrial Development Zone,Guangdong Province,China

Website：www.aimenpad.com

Contact Person:

Luo Wen: +86 18666661387

Liu Jianfeng: +86 18027317256

Jiao Ning: +86 18688678662